Key Hose - mdi

ECO-10

Key Hose ECO-10

Colors available (NFPA colors and special stripe available)
Clear Red Yellow Blue Green Orange Black Tan

Diameters available
1" 1 1/2" 1 3/4" 2" 2 1/2" 3" 4" 5"

Performance Chart

Size Part No. Service Test Proof Test Burst Test Bowl Size Weight/ft. Uncoupled
1" DP10-800 400 psi 800 psi 1200 psi 1 3/8" .14 lbs.
*1 1/2" DP15-800-ECO 400 psi 800 psi 1200 psi 1 15/16" .23 lbs.
*1 3/4" DP17-800-ECO 400 psi 800 psi 1200 psi 2 1/16" .28 lbs.
*2" DP20-800 400 psi 800 psi 1200 psi 2 2/5" .31 lbs.
*2 1/2" DP25-800-ECO 400 psi 800 psi 1200 psi 3" .42 lbs.
*3" DP30-800-ECO 400 psi 800 psi 1200 psi 3 3/8" .56 lbs.
*4" DP40-600 300 psi 600 psi 900 psi 4 1/2" .76 lbs.
5" DP50-600 300 psi 600 psi 900 psi 5 1/2" .93 lbs.



Scope:
Hose manufactured to this specification shall be of superior quality and workmanship. The hose shall withstand the rough usage of front line fire fighting. Hose specified,shall meet NFPA 1961 standards. For North American customers, due to lack of verification of adherence to NFPA 1961 standards, import hose shall not be accepted. Hose furnished under these specifications will have a potential service life and warranty of 10 years, barring mistreatment that would render it unfit for service. Upon delivery the hose shall be free from defects in workmanship and materials.

Jacket Construction:
Double jacket hose manufactured to this specification shall be tightly woven with filament polyester yarn in the filler, and ring spun polyester yarn in the warp of both the inside and outside jackets. Inside jackets manufactured from 100% filament polyester would not meet ECO-10 minimum standards. The hose shall be resistant to most chemicals and petrol products, and resist deterioration due to exposure to UV-rays and ozone. It shall not be affected by rot or mildew. ECO-10 double jacket hose may be woven with a double tracer stripe for ease in identification and twist. The inside and outside jackets shall be manufactured with a minimum pick count of 11 picks per inch for increased strength and abrasion resistance. The inside jacket shall be manufactured using a reverse twill process to reduce friction loss. The inside jacket shall be manufactured on a circular loom in a clockwise direction and the outside jacket in a counter-clockwise direction. The hose must be of sufficient body and weight to meet the demands of heavy-duty fire fighting usage.

Abrasion Impregnation:
Hose assemblies shall be available with the special "Key-Lok" polyurethane based polymer impregnation for added abrasion resistance and ease in identification. Impregnated hose shall meet the requirements of MIL-H-24606B for abrasion resistance. NFPA colors may be specified by the end-user. A double dip process for twice the abrasion resistance is available upon request.

Lining:
The rubber lining shall be a single-ply extruded tube of synthetic high tensile EPDM compounded to resist ozone. The finished form shall be free of pits or other imperfections and have a smooth finish for better flow characteristics. Polyurethane tubes, SBR and/or PVC tubes that sacrifice durability of the hose life for the sake of weight are not acceptable. The tube thickness shall be a minimum of .020". The adhesion between the tube and jacket shall meet a minimum requirement of 12 pounds on a 1 1/2" strip when tested in accordance to UL-19 standards. Minimum tensile strength requirements for the finished tube requirement shall be 1800 PSI. A valid USA/ULC Underwriters inspection procedure shall be in force.

Performance:
The minimum burst test pressure, when tested in accordance to NFPA 1961, on all ECO-10 diameters up to 3" shall be 1200 PSI/82 Bar. Minimum burst test requirements for 4" and 5" diameters shall be 900 PSI/62 Bar. Service test pressures stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962. A valid USA/ULC Underwriters 800 PSI/55 Bar listing shall be in force. Lengths available up to 100 feet.

Standards:
Fire hose manufactured to this specification shall meet and exceed all performance requirements of NFPA 1961 and Underwriter's Laboratories standards.

Couplings:
ECO-10 shall be coupled with 6061-T6 extruded aluminum threaded couplings or forged storz. Special threads or other custom features available upon request.

Our Sales Team is standing by to help you with your order or questions about the Key Hose Product Line. Give mdi a Call Today!

We are available via phone Monday - Friday, 7:30 AM to 6:30 PM (EST), including most holidays. You can send an Email or Request A Quote anytime!